DIY Mid Century Modern Nightstand

Mid century modern nightstand – Try turned wooden legs for a traditional look, or go to a modern mid-century aesthetics legs closed. To do it first you need to cut a piece of particleboard to fit exactly into a small suitcase. Trim the corners of particleboard to accommodate the corners of the bag if rounded.

Books stack several hardcover work surfaces, so the stack is higher than the depth of the lower half of the bag. Place the particleboard on top of the books, and the bottom upside down on the top of the board suitcase. This pushes the plaque against the bottom inside the suitcase. Attach a top plate angle to each corner of the bottom case of mid century modern nightstand. The top plate angle is a square of metal, held in place with four screws, with an angled hole in the center that the legs of the table screw. Use screws that pass through the bottom suitcase and half the thickness of the particleboard.

Screw one leg of the mid century modern nightstand in each of the top plates. Table legs in wood or metal are durable enough to withstand the suitcase, along with the elements that put in or on it. Turn right side of the case and the latch.

Picture Gallery of the DIY Mid Century Modern Nightstand

Wood Mid Century Modern NightstandSmall Mid Century Modern NightstandSimple Mid Century Modern NightstandMid Century Modern NightstandMid Century Modern Nightstand WoodenMid Century Modern Nightstand WhiteMid Century Modern Nightstand SetsMid Century Modern Nightstand LampsMid Century Modern Nightstand DIYMid Century Modern Nightstand DesignDouble Mid Century Modern NightstandDIY Mid Century Modern Nightstand

Comments are closed.